|Application:||Polishing UPC And Angled Connector Of SC / FC / E2000 / ST / MU And LC||Weight:||About 20kgs|
|Product Name:||High Quality Central Pressurized Fiber Optic Polishing Machine||Dimension:||240mm * 390mm *580mm|
MPO Connectors Fiber Optic Polishing Machine,
MTP Fiber Optic Polishing Machine,
7 Inch Screen fiber polishing machine
Opticcal Fiber Polishing Machine LYH450 Fiber Patch Cord Making Machine Four Corners Grinding Machine
LYH-450 polishing machine is developed and produced by our company for MTP/MPO patch cord and pigtail..can be used for many kinds of connectors,such as:FC/UPC,SC/UPC,ST/UPC,LC/UPC,MU/UPC,FC/APC,MT-RJ,E2000 etc. it is best for polishing MTP,MPO connectors.The polishing speed, polishing pressure and polishing time can be set separately in each process to ensure maximum process flexibility and optimal product quality. The polishing pressure is controlled by closed loop, and the stable precision can reach /-0.1LbS. Meanwhile, the time is controlled by the program controller, and the control precision is 0.1s.
1.Pc-based 7-inch touch screen
2.Machine working voltage AC220V is converted into 24V; if the working voltage is 110V, pls Use a transformer to convert the voltage.
3.Slow start, polishing compensation, program control. It can store 20 polishing processes, each of which supports 8 polishing processes.
4.Programmable pressure and speed of slow start function
5.Programmable polishing film counting function
6.Programmable machine maintenance unit
7.Pneumatic pressure control can be calibrated by feedback of pressure sensor
8.The pressure can be compensated automatically according to the jumper number on the fixture
9.speed Adjustable range is 10-200 RPM
10.Process can be stored to other machines by USB
11.Automatic alarm and stop when air pressure is low
12.For larger loads, the machine can polishing 24 MTP/MPO connectors together, and the 3D interference pass rate is over 98%.
13.ntuitive and humanized operation interface, real-time display of current grinding process, running speed, pressure, and can call any process at will.
Preparation Before Polishing
1 Preparation of polishing-jig
Attention: Assure correct and good mation between plate bottom holes and pins of centre-driving-shaft.
2.Placement of polishing film
Clean Glass disc over polishing-plate with tissue and alcohol, assure no dirty and other defect.
Place polishing-film to polishing-jig with centre alignment, wipe paper from middle to margin by hand, assure no air bubble underneeth.
3.Setup of polishing procedure
According polishing different connectors , please choose corresponding procedure on LCD
|Machine size :||260mm*400mm*500mm|
In order to keep the machine in stable and normal status, should fulfill manitenance when the machine finish operating.
Contact Person: Austin